48V 1500W Electric Bike Conversion kit with LCD display monitor Ebike Hub Motor Bicycle E bike 26″ Rear

描述

This 26″ 1500W Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike, which delivers unequaled performance and reliability. You’ll be out cruising along at 34mph (55km/h) without a sweat!

Key feature:

* Built to the highest international standards, CE, EN15194

* 48V 1500W and 250W super power brushless gearless hub motor

* LCD display shows battery level and pedal assistance settings

* Restricted to 250W and 16 mph by default as a road-legal kit

* Nylon tire& alloy rim& galvanized steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Adjustable 5 level intelligent pedal assist with LCD Display

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist

* Aluminum alloy powerful controller

 

Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1500W power or 250W power by a single blue switch wire is embedded in controller.(Only for Twist Throttle)

* Still remain the full 1500W power with no speed control.(Only for Pedal Assist System,”PAS”)

SPECIFICATIONS:

Wheel type: Rear Wheel

Motor: Brushless Gearless

Tire Material: Nylon

Rim Material: Double Wall Alloy

Power: 1500W / 48V or 250W / 48V

Spokes: Steel, 12G×2.6mm, 36pcs

Wheel Size: 26″ (660mm)

Rim Diameter: 22.56″ (573mm)

Tyre Size: 26″ x 1.95″

Rear Dropout: 5.3″ (135mm)

Wheel Axle: 8.28″ (210 x Φ10mm)

Compatiable Disc: 160mm

Torque: 60 N.M

Net weight:12.5kg

Max speed: 34 mph or 16 mph (55km/ or 25km/h)

Max load capacity: 440 LBS

Package Include:

1x Brushless Gearless Motor Rear Wheel

1x Intelligent Motor Controller

1x SW900 LCD Display

1x Pedal Assist Crank Sensor

1x Cable Ties & Plastic Coil

1x Pair of Handle Bars (included Twist Throttle)

1x Controller Bag

1x Pair of Brake Handles

1x Manual

1x Tyre (Not Installed)

1x 7 Speed Freewheel (Not Installed)

 

Note:

1.The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah.

2.Battery and charger are not included in package.

3.The AU regulations dictate that a kit must not exceed the rated power of 250W to be road-legal!

So please connecting the Road-legal Switch Wire and disconnect the PAS on Road.

Caution: For your Safety, Please turn off the battery before connecting the Controller!